How To Make Filofax Dividers

The first thing you need for your new planner has to be a new set of cute dividers! The ones that they usually come with are just plain and simple, and us planner addicts like everything to be cute with personality. You can definitely find tons of etsy shops who provide and sell pre-made dividers for planners, but sometimes they aren't the size that you want, or the designs just aren't your style. Today I will be showing you how to make your very own dividers easily!

For this tutorial you will need the following items:

• Set of stock dividers to use as a template
• Designed card stock papers
• Paper Cutter
• Small Scissors
• Pencil
• Hole Puncher
• Laminator

If you already have these items on hand, creating dividers will be so easy and cheap for you! & you will be able to change up your dividers whenever you like!

Tutorial (with Pictures!)

Step 1:
Gather your set of stock dividers and choose the same amount of card stock papers in the designs of your choice. Organize the designs in the order you'd like them to be in your planner. Also turn on your laminator so it can heat up and be ready.

Template Dividers & Card Stock Papers

Step 2:
One by one, take your dividers and use your pencil to trace them onto each card stock paper.

Trace Dividers

Step 3:
Trim each card stock paper with your paper cutter, being sure not to cut off the tabs

Use a Paper Cutter to trim along the traced line

Trimmed Paper, leaving the tabs

Step 4:
Get your small detailing scissors and cut around the tabs

Use scissors to cut around tabs

Step 5:
Erase any pencil marks on your paper

Step 6:
Take one of your dividers as a guide to mark where you will need to hole punch it. In my case I was using a daytimer with no dividers so I just placed it next to the rings and marked each spot where I needed to hole punch it.

Mark where you will need to punch holes with a pencil

Step 7:
Hole punch each divider using a single hole puncher. If you have a 6-hole puncher for your planner, this step will be so much faster!

Hole punch dividers

Step 8:
Laminate each divider by placing your paper inside of the laminating sleeve, one by one. Be sure to insert the folded end into the laminator first. Laminate using the thicker mil setting so you can be sure it is thicker.

Laminating sheets that I use

place divider as close to the closed/folded part

Place folded part into laminator first, using the thicker mil setting

Don't pull it out, just wait for it to finish on its own

Step 9:

Trim the laminated sheet around your divider and use your small scissors to cut around the tabbed part again.

Trim laminated sheet

Trim around the tabs

Step 10:
Hole punch the holes again!

Hole punch holes again

Step 11: 
Place all of the dividers inside of your planner and use washi tape, stickers, a label maker, or a permanent marker to label your tabs!

Finished Dividers!

I hope you learned something from this and happy planning!
 Enjoy your very own handmade dividers!